Our Premium 3 Mil Gloss Thermal Laminating Film is a polyester base layer film with a low-melt co-polymer adhesive. Low-melt adhesive films activate at a lower temperature and have a more aggressive adhesive than homopolymer film. Using a lower temperature reduces wear on your laminator and may allow you to laminate at a faster rate. Low-melt films are commonly referred to as Nap-Lam II.

To ensure a lamination film is a match with your laminator, check that the core size, film width, film thickness and heat settings are compatible prior to ordering.

BENEFITS OF LAMINATING:

• Prolongs the life of printed materials or drawings
• Prevents damage from moisture or dirt
• Adds strength to print
• Reduces the need to reprint materials saving costs

FEATURES:

• Size: 12" x 250'
• Thickness: 3 mil
• Core: 1"
• Finish: Clear / Gloss
• Adhesive: Low-melt (co-polymer)
• Typical Temperature Setting*: 230° – 260° F
• Adhesive Side: In
• Priced: Per roll
• Boxed: 2 rolls per box
• Order in increments of 2

* It is quite possible that variances from the above recommended temperature settings may be necessary due to type and thickness of a particular substrate ambient (surrounding) temperatures, humidity or type and make of laminator. The temperature may need to be higher when laminating thicker media or substrates on a continuous basis.