Permanent Paper is a white matte polyester paper specifically designed for high heat laser printers and photocopiers. Permanent paper produces excellent image quality that can withstand and last in the harshest environments. It is tear-resistant, waterproof and heat stable while running just like paper. When strength and toughness are needed, Permanent Paper is your solution.
Available Sizes - 8.5" x 11", 11" x 17", 12" x 18" & 14.33" x 20.50"
Thicknesses - 4 mil (125 gsm), 5 mil (160 gsm), 8 mil (260 gsm) & 11 mil (365 gsm)
- 14 mil (510 gsm) available for iGEN & NexPress only
Print Side Recognition - Coated on both sides, enabling printing on either side
Sheet Handling - Always handle the sheets at the edges when possible
Acclimation - Allow media to acclimate in original packaging for 24 to 48 hours before use.
and 40-55% relative humidity. Failure to control conditions will cause static buildup impacting print image
quality and media handling performance. Running with a humidity under 40% is not recommended. Storage - Store any unused media in the original packaging. If not stored between uses at
print room conditions, allow the media to re-acclimate before next use. Offset Press - If using this media on an offset press, you can use oxidative and UV inks formulated
for use on plastics. When using oxidative inks, limited use of drying powder is recommended. Maintain a minimum
of 45% press room relative humidity. Recyclable - Yes, as a category 7 or category 1 polymer depending on local regulation and availability.
Pre-Perfed Templates Available:
NOT FOR USE IN INK JET PRINTERS